Power distribution, with purpose.
Switchgear specifications compress important design choices into a few lines of ratings, codes, and interface details. This glossary explains how to read those terms together, where common misunderstandings arise, and what information helps a manufacturer evaluate a request for new equipment.
Voltage: nominal system value versus equipment rating
Nominal voltage describes the system’s designated operating level, such as a facility distribution voltage. An equipment voltage rating describes the limits for which a particular device or assembly is designed; it is not interchangeable with the nominal value. Specifications may also identify maximum system voltage, insulation level, or other voltage-related characteristics. The correct selection depends on the system design and applicable equipment standards, not just a familiar number on a one-line diagram.
When requesting a quote, provide the nominal voltage, grounding arrangement, frequency, and any available system study or one-line drawing. Identify whether the equipment is low-voltage switchboard or switchgear, or medium-voltage equipment. UL 891 applies to low-voltage switchboards; it is not a general listing for medium-voltage equipment. Voltage classes and exact ratings must be reviewed for the specific order.
Continuous current: the normal-load duty
Continuous current is the current equipment can carry under specified conditions during normal operation. It is distinct from fault current: a feeder may carry a steady load for long periods while also being exposed to a much larger, brief current if a fault occurs. Bus, breakers, switches, and connections must be considered as a coordinated design, including enclosure conditions and the intended operating environment.
A load estimate alone may not settle the required rating. Share the expected load, future expansion assumptions, demand information, number and type of feeders, and any known ambient or installation constraints. Avoid treating a component’s nameplate value as proof that the entire assembly is suitable for the application. The manufacturer and project engineer should confirm component availability and assembly details against the project requirements.

Fault ratings: short-circuit withstand and interruption
Fault ratings address abnormal conditions, but related terms describe different duties. Interrupting rating concerns a protective device’s ability to interrupt fault current under specified conditions. Short-circuit withstand or assembly ratings concern the ability of equipment to withstand fault effects for a stated duration or under a defined protective-device arrangement. These ratings must be checked at the applicable voltage and against the available fault current at the installation point.
Provide the available short-circuit current and its source, such as a utility study or transformer data, along with the upstream protective-device information. If those values are unknown, identify that clearly rather than assuming a standard rating will fit. Protection coordination, device selection, and the assembly rating require project-specific engineering review; a rating copied from another installation does not establish suitability.
Configuration terms: buses, mains, feeders, and sections
A main device is commonly the incoming protective or switching device, while feeder devices serve outgoing circuits. A bus is the conductive path distributing power among sections and devices. Section arrangement, bus connections, compartment layout, and whether equipment is front- or rear-accessible affect the physical design and the way the lineup interfaces with the room and connected systems.
A useful request includes a one-line diagram, feeder schedule, required device functions, preferred lineup arrangement, cable entry direction, and available space or access limits. Note connections to generators, transformers, transfer equipment, control systems, or existing gear where relevant. For Dallas–Fort Worth facilities as for projects elsewhere, delivery planning depends on confirmed dimensions, route constraints, receiving arrangements, and the finalized configuration—not simply the service area.
Standards, construction, and scope language
A standard or certification reference has meaning only when it applies to the equipment type and the specific proposed assembly. UL 891 is associated with low-voltage switchboards; it should not be used as shorthand for medium-voltage or high-voltage switchgear. Likewise, terms such as “custom,” “American components,” or “shorter lead time” describe possible manufacturing goals or sourcing preferences, not a substitute for confirming a particular design, component, standard, or schedule.
State the required equipment type, governing project specifications, environmental conditions, and any sourcing or domestic-content requirements. All ratings, standards, component availability, and U.S.-origin requirements must be confirmed for the specific order. New equipment can be custom-built to defined project needs, but no general glossary term establishes that a requested option is available or compliant without review.
From glossary terms to a quote-ready specification
A quote request is stronger when it connects terminology to actual project documents. Include the one-line diagram, equipment schedule, site voltage and grounding data, fault-current information, load and feeder requirements, enclosure or environmental conditions, and target delivery window. Identify what is fixed and what may be proposed as an alternative. This helps distinguish mandatory ratings from preferences and exposes missing engineering inputs early.
A manufacturer can review the supplied information for a new-equipment build and clarify open specification points before finalizing scope. Confirm who is responsible for system studies, installation, commissioning, and field verification; do not assume these services are included unless explicitly established. Electrical equipment can present lethal hazards. Only qualified personnel should perform installation, inspection, or maintenance under applicable safety procedures, and work on energized equipment must not be undertaken casually.
Specifications & planning
Review the details that matter for your application. Final specifications and availability should be confirmed for your project.
| Evaluation factor | What to establish |
|---|---|
| Voltage | Nominal system voltage and applicable equipment rating; confirm for the specific design |
| Continuous current | Expected load, feeder duties, and operating conditions |
| Fault duty | Available fault current, protective-device data, and required withstand or interruption duty |
| Interfaces | One-line diagram, connections, access, cable entry, and space constraints |
