Power distribution, with purpose.
Bus and insulation choices in medium-voltage metal-clad switchgear depend on the system, installation, and specified electrical duties—not on voltage class alone. A sound specification connects nominal system voltage and equipment maximum rating to insulation coordination, clearances, short-circuit withstand, and the interfaces between compartments. For purchasers in Dallas–Fort Worth and elsewhere, those project details help determine whether a proposed custom assembly is suitable and whether its components are available for the requested build.
Start with system voltage and equipment rating
State the system’s nominal voltage and the equipment maximum voltage rating as separate values. The nominal value describes the power system; the maximum rating identifies the equipment’s voltage class and insulation duty. Common medium-voltage classes include 5 kV, 15 kV, 27 kV, and 35 kV, but a class label by itself does not establish suitability. The specification also needs the applicable power-frequency withstand and impulse withstand requirements, as well as any project or utility criteria that govern their selection.
Confirm grounding method and system conditions, including whether the installation is indoor or outdoor, the expected operating environment, and any unusual altitude or contamination concerns. These can affect insulation coordination and clearances. Do not assume that equipment for a nominal voltage will automatically meet a particular maximum rating or withstand requirement. The manufacturer and project engineer should review the complete requirements for the specific order.
Choose bus insulation as part of the design
Bus insulation may involve covered conductors, molded or supported insulating components, barriers, or a combination of design features. Its role is to support electrical separation and reduce exposure to contamination or accidental contact, but it does not remove the need for appropriate phase-to-phase and phase-to-ground clearances. The selected arrangement must suit the bus geometry, compartment layout, temperature rise limits, and service conditions. Component materials and availability also need confirmation for the requested voltage class and configuration.
Insulated bus can help address specific environmental or layout constraints, yet it can introduce inspection and maintenance considerations. The specification should identify the intended insulation approach where required, rather than treating “insulated bus” as a complete design description. Discuss how joints, supports, transitions, and terminations are handled, and how inspection access will be maintained. A custom design review should resolve these points without assuming one insulation system is suitable for every installation.

Coordinate clearances and withstand duties
Electrical clearances must be evaluated throughout the assembly, not just along straight bus runs. Bus supports, splices, insulating barriers, cable terminations, instrument transformers, shutters, and compartment partitions can affect the available spacing. The design must account for the stated withstand duties and the physical arrangement while preserving required access and compartmentation. Specify any site constraints that could influence layout, such as room dimensions, cable entry direction, conduit locations, or limited working space.
Short-circuit withstand is a separate but connected requirement. Provide the available fault current at the switchgear location, the required duration, and protective-device clearing information when known. Bus bracing, supports, joints, and connected devices must be evaluated as a coordinated assembly for the applicable duty. Do not infer a withstand rating from the voltage class, bus material, or a component’s individual rating. Ratings and compliance must be confirmed for the proposed configuration and governing standards.
Illustrative design scenario and tradeoffs
Consider a hypothetical indoor lineup serving a facility with a 15 kV-class system, cable entry from below, and a defined short-circuit duty. The purchaser also identifies a space constraint and requests insulated main bus. That information gives the design team a starting point, but it does not establish a final bus layout, insulation method, clearance, or rating. The team would need the nominal system voltage, maximum equipment rating, grounding details, withstand requirements, cable data, and relevant room and access drawings before evaluating the arrangement.
A more compact bus layout might help fit the room but can constrain clearances, cable bending space, or inspection access. Added barriers or insulation may address a specific separation concern, while increasing component complexity or affecting service access. The appropriate balance depends on engineering review of the whole assembly and applicable requirements. This scenario is illustrative only; it is not a representation of a completed customer project or a guaranteed design capability.
Define interfaces and approval boundaries
Bus and insulation decisions depend on interfaces with incoming and outgoing cables, transformers, grounding equipment, protective relays, and upstream or downstream devices. For a quote, provide a one-line diagram, system voltage and grounding information, fault-current and clearing-time data, required ratings, lineup arrangement, cable sizes and entry details, and available drawings. Include the governing specification, standards, environmental conditions, and any US-origin or component requirements. Incomplete interface information can lead to assumptions that later affect layout, component selection, or schedule.
A purchaser’s engineer and the authority having jurisdiction retain responsibility for project-specific design criteria and approvals. The manufacturer can review requirements and develop a proposed assembly scope, but submittals should be checked and approved through the project’s established engineering process before release for manufacture. UL 891 applies to low-voltage switchboards, not as a general listing for medium-voltage metal-clad switchgear. Any applicable standards, ratings, component selection, and US-origin requirements must be confirmed for the specific order.
Quote review and documentation
Ask the manufacturer to confirm availability of the requested voltage class, bus and insulation components, and configuration before relying on a specification or schedule. The company builds and supplies new equipment, including custom assemblies using American components where specified; component sourcing, origin requirements, and suitability remain order-specific. Shorter lead time may be a goal, not a guarantee, so the quote should identify assumptions and confirm timing only after the design and component review.
Useful documentation for evaluation includes the proposed one-line and arrangement drawings, bus and compartment details, equipment ratings, insulation coordination basis, short-circuit withstand information, and a clear list of exceptions or open items. Confirm what is included in the manufacturer’s scope and what is supplied or approved by others. For Dallas–Fort Worth projects as well as nationwide shipments, verify shipping and site access requirements separately; a shipment destination does not imply local installation or field services.
Specifications & planning
Review the details that matter for your application. Final specifications and availability should be confirmed for your project.
| Evaluation factor | Information to establish |
|---|---|
| Voltage basis | Nominal system voltage and equipment maximum rating; confirm for the order |
| Insulation and clearances | Required withstand duties, environment, and assembly geometry |
| Short-circuit duty | Available fault current, duration, and protective-device clearing data |
| Interfaces and documentation | Cable details, lineup drawings, governing requirements, and approval path |
