Power distribution, with purpose.
Choosing between a switchgear manufacturer and an equipment reseller is not simply a choice between buying direct and buying through a sales channel. The important question is who takes responsibility for turning your electrical requirements into a defined, documented assembly—and who resolves gaps when the specification, components, or interfaces do not align. We manufacture and supply new switchgear; purchasers should confirm the specific scope and evidence for each order rather than assume that a company’s label answers those questions.
Trace design ownership from specification to approved drawings
A reseller may transmit a manufacturer’s catalog selection or quote, while the original equipment manufacturer controls the assembly design. Other arrangements can divide responsibilities: one party selects components, another builds sections, and a third supplies protective devices or controls. Ask who prepares the project drawings, who reviews the one-line diagram and load requirements, and which organization must resolve a conflict between the specification and the proposed design. The answer should identify responsible parties and deliverables, not just state that the equipment is custom.
For a low-voltage switchboard, review the proposed bus arrangement, feeder and main-device configuration, enclosure and access requirements, metering, control wiring, and provisions for future circuits. For medium-voltage equipment, clarify the applicable voltage class, switching and protection scope, and required interfaces; UL 891 applies to low-voltage switchboards, not medium- or high-voltage switchgear. System nominal voltage and equipment maximum rating are distinct, so require engineering confirmation of ratings and short-circuit requirements for the actual order.
Determine who performs and controls the manufacturing work
The word manufacturer can describe different levels of responsibility. Ask which organization fabricates or assembles the equipment, sources major components, performs inspections, and controls changes after drawing approval. If work is split among companies, request a scope boundary showing who supplies the enclosure, bus, breakers or switching devices, protection and metering, and any transition or connection components. A clear boundary helps prevent a missing interface from being treated as someone else’s responsibility.
We build and supply new equipment, including custom builds using American components, with shorter lead time as a goal rather than a guarantee. Component availability, ratings, standards, and any U.S.-origin requirements must be confirmed for the specific configuration and order. A purchaser should verify the proposed bill of material and origin documentation against the contract requirements; a general claim about domestic components is not a substitute for evidence tied to the equipment being quoted.

Compare documentation and warranty accountability
Documentation is a practical test of whether responsibility is well defined. Before commitment, establish what the supplier will provide, such as a project-specific quotation, equipment data, approved drawings, wiring or connection information, component schedules, and applicable test or inspection records. Confirm drawing revision control and how deviations are identified. If a reseller is involved, ask whether it can obtain answers and controlled revisions from the actual manufacturer throughout engineering and production, not only during sales.
Read warranty language for the named warrantor, coverage period, start date, exclusions, remedy, and process for reporting a defect. Determine whether coverage applies to the complete assembly or only individual supplied components, and who coordinates a claim involving more than one supplier. Do not assume that a manufacturer warranty automatically includes installation, field services, freight, or consequential costs. Those items, along with any reseller’s separate obligations, need explicit agreement in the purchase documents.
Test the handoff with a hypothetical project decision
Consider a hypothetical facility in the Dallas–Fort Worth area replacing a low-voltage distribution section while retaining existing upstream equipment. A reseller offers a standard configuration quickly but has not yet confirmed the available connection space or the existing system’s short-circuit requirements. A manufacturer offers a custom configuration, subject to engineering review, but needs clearer site and interface information. The sound choice is not automatically the direct quote: it is the proposal that can demonstrate a feasible, documented design and an accountable path for resolving interface questions.
In this example, the purchaser would compare the two scopes against the existing one-line diagram, equipment nameplates, available fault-current study, cable or bus connection information, and required outage or delivery constraints. They would ask each bidder to identify exclusions, assumptions, drawing responsibility, and the party that will address a mismatch discovered during design review. This is a decision scenario, not a customer project or a claim about a particular site. For projects elsewhere, the same discipline applies even when equipment ships nationwide.
Require evidence and define the boundary before ordering
Useful evidence is specific to the proposed equipment. Request the manufacturer’s identity and scope of work, a project-specific technical submittal, component and rating information, a deviation list, and a sample of the documentation expected at shipment. Where UL 891 is relevant, confirm the applicable low-voltage switchboard requirements and the status of the specific assembly; do not infer that a manufacturer’s experience or a component’s marking establishes assembly status. Require engineering review of short-circuit ratings, standards, and any stated U.S.-origin conditions.
Make the scope boundary explicit for foundations, field connections, installation, commissioning, protection settings, upstream coordination, and site acceptance testing. These activities should not be assumed included merely because a supplier builds equipment. If they are outside the quotation, identify who will perform them and what information the equipment supplier must provide. A precise boundary reduces disputes between the purchaser, manufacturer, reseller, engineer, and any installation contractor.
Prepare a complete, actionable request for quotation
For a useful quote, provide the one-line diagram, equipment schedule, system nominal voltage, required equipment ratings, available fault-current information, load and feeder data, enclosure and environmental conditions, control and metering needs, applicable specifications, and delivery destination. Include connection and dimensional constraints for replacement work, the intended operating arrangement, required submittals, preferred drawing milestones, and any project-specific standards or domestic-content clauses. Mark unknowns clearly so they can be raised as engineering questions rather than silently assumed.
Ask the supplier to return a defined configuration, price quotation, lead-time estimate subject to confirmation, exclusions, required purchaser inputs, and a list of unresolved technical items. We can evaluate requests for new custom-built equipment and identify what needs confirmation before an order; final ratings, component availability, standards, origin requirements, and schedule depend on the specific design and order. That handoff gives the purchaser a concrete basis to compare a manufacturer with a reseller and to assign accountability before procurement.
Specifications & planning
Review the details that matter for your application. Final specifications and availability should be confirmed for your project.
| Evaluation factor | Evidence to request |
|---|---|
| Design ownership | Named party responsible for project drawings and technical resolution |
| Manufacturing scope | Written division of assembly, component sourcing, inspection, and interfaces |
| Documentation | Project-specific submittal list, revision control, and applicable records |
| Warranty and accountability | Named warrantor, coverage terms, exclusions, and claim coordination |
