NEW AMERICAN-MADE POWER DISTRIBUTIONSERVING DALLAS – FORT WORTH
Switchgear cabinets arranged on a warehouse floor
NEW EQUIPMENT FOR DALLAS–FORT WORTH

Coordination Study in Switchgear: Definition and Application

Learn how a switchgear coordination study evaluates protective-device curves, operating times, settings, system data and documentation for a specific.

MADE IN USAAmerican components
UL 891Switchboard assemblies
SHORT LEAD TIMESConfirm your project schedule
BUILT FOR YOUR PROJECT

Power distribution, with purpose.

A coordination study is an engineering analysis of protective devices in a defined electrical system. It compares their time-current characteristics and evaluates operating times and settings so a fault is cleared by an appropriate device while limiting unnecessary interruption elsewhere. The result depends on accurate system information and the actual devices selected; it is not a general guarantee that every fault will be isolated without affecting other equipment.

What the study evaluates

Engineers model the path from the source through transformers, switchgear, feeders and downstream loads, then compare the protective devices along that path. Depending on the system and study scope, devices may include circuit breakers, fuses and electronic trip units. Their time-current curves show how long they may take to operate at different current levels. Engineers assess whether the intended devices can distinguish between faults in different parts of the system while still providing protection within applicable limits.

Coordination is not judged from device labels alone. A breaker frame rating, sensor rating and trip setting describe different things, and a setting that improves selectivity in one part of the curve may affect protection or clearing time elsewhere. The analysis must account for the specific device type, available adjustment ranges, trip functions, tolerances and relevant system conditions. Any proposed settings require review against equipment ratings, protection objectives and applicable project requirements.

Why system data and device details matter

Useful inputs include the one-line diagram, source and transformer information, conductor details, equipment and component data, existing protective-device models, and the available fault-current information at relevant buses. The study engineer also needs the intended system configuration and any operating modes that change the source or fault-current path. Missing or outdated data can shift calculated currents and change how curves overlap, so assumptions should be identified rather than treated as confirmed facts.

Device documentation is equally important. Manufacturer, model, frame or fuse class, sensor and trip-unit details, installed options, and available settings help distinguish the equipment actually specified from a similar product family. For a new switchboard or switchgear package, the study may depend on component selections and settings that are not final when the initial quotation is prepared. The purchaser should identify who supplies the engineering study, who verifies field-installed settings, and how revisions will be reconciled with the approved equipment documents.

Illustrative close-up of copper busbars in a motor control panel
Illustrative industry photograph · ToT89 / Wikimedia Commons · resized · CC BY-SA 4.0

Illustrative application: a feeder fault

Consider a hypothetical facility with a main protective device feeding a distribution switchboard, which in turn supplies a branch panel. If a fault occurs on one branch, the intended response may be for the branch device to clear it while the upstream devices remain closed. An engineer plots the devices’ curves against the calculated current at the relevant points and checks whether the branch device is expected to operate first over the fault-current range being assessed.

If the curves overlap, or the upstream device is expected to trip first at a particular current, the analysis can reveal a selectivity limitation. Potential responses depend on the equipment and project goals: an engineer may evaluate other device selections, permitted settings, protective functions or system arrangements. There is no universally correct adjustment. A change must be checked for protection, equipment withstand and clearing-time implications, and the approved design must reflect the final components and configuration.

A common misunderstanding: coordination is not a rating

A coordination study does not assign a new interrupting rating to a breaker or increase a switchgear assembly’s short-circuit rating. Those are separate equipment and system considerations that must be supported by the applicable component and assembly documentation. A favorable curve comparison cannot make a device suitable for fault current beyond its rating, nor does it establish that an assembly meets a particular construction standard.

Likewise, coordination does not necessarily mean that only one device will operate for every possible fault. The outcome depends on the study boundary, fault-current range, device behavior and project criteria; some combinations may be selectively coordinated only over part of the range. The report should state its assumptions, limitations, device data and conclusions clearly enough for responsible engineers and installers to understand what was evaluated. Required ratings, standards, documentation and any U.S.-origin requirements must be confirmed for the specific order.

How findings affect equipment documents

Study results can influence switchgear component selection, trip-unit configuration and the information needed for review before release. When a custom assembly is being developed, unresolved upstream data or changing downstream devices may affect the study and require document updates. If UL 891 applies, it concerns low-voltage switchboards; it is not a general listing for medium-voltage switchgear. Voltage class, assembly requirements and applicable standards must be established for the particular application, not inferred from a coordination report.

For a new-equipment quotation, provide the project voltage and system configuration, one-line diagram, available fault-current data or its status, desired equipment scope, known protective-device requirements, and the study’s intended scope and schedule. Identify whether the purchaser or another project engineer will furnish final settings and study documents. A manufacturer can use confirmed requirements to evaluate a custom build with American components and pursue a shorter lead time as a goal, but component availability, ratings, compliance and timing must be verified for the order.

Related terms and practical handoff

A short-circuit study calculates fault-current levels at selected points; those results may be inputs to coordination analysis. An arc-flash study evaluates potential incident energy and related hazards under defined assumptions, and may use protective-device clearing times, but it answers a different question. Selective coordination describes the intended relationship between protective devices so that the device nearest a fault operates first within specified conditions. These terms are related, but one analysis does not automatically substitute for the others.

For projects in Dallas–Fort Worth or elsewhere, the same handoff principle applies: align the study model with the equipment actually furnished and installed. Before approval, responsible project parties should resolve discrepancies between the one-line diagram, study report, equipment submittals and final settings. A purchaser seeking new switchgear should make these interfaces explicit in the specification and quotation request, including who owns study revisions when system data or selected devices change.

PROJECT CONSIDERATIONS

Specifications & planning

Review the details that matter for your application. Final specifications and availability should be confirmed for your project.

Coordination Study: specifications and planning considerations
Evaluation factorWhat to confirm
System modelSources, transformers, conductors, system modes and study boundary
Protective-device dataManufacturer, model, trip or fuse details, options and adjustment ranges
Study inputsOne-line diagram, fault-current information, assumptions and data gaps
Document handoffStudy scope, settings responsibility, revision process and final equipment match
READY TO DISCUSS YOUR PROJECT?Let's build what's next.
Call (951) 403-5738
LET'S GET TO WORK

Power your next project
with confidence.

Talk through your switchgear and power distribution needs with our team.

Call (951) 403-5738
Request a Quote