NEW AMERICAN-MADE POWER DISTRIBUTIONSERVING DALLAS – FORT WORTH
Installed switchgear below conduit in an equipment room
NEW EQUIPMENT FOR DALLAS–FORT WORTH

Distribution Switchboard Load Segregation

Plan distribution switchboard load segregation with clear load priorities, documentation, protective-device coordination and project-specific design inputs.

MADE IN USAAmerican components
UL 891Switchboard assemblies
SHORT LEAD TIMESConfirm your project schedule
BUILT FOR YOUR PROJECT

Power distribution, with purpose.

Distribution switchboard load segregation assigns circuits to groups according to what must remain available, what can be interrupted, and how loads interact during faults or transfers. A sound arrangement begins with the facility’s operating priorities and documented electrical data—not simply a row of breaker spaces labeled normal, critical, and process.

Set priorities by operating consequence

Normal loads are generally acceptable candidates for interruption during an outage or planned transfer, but the label does not define their electrical behavior. Lighting, receptacles, HVAC, and general-purpose equipment may have different restart needs, motor inrush, or consequences if lost. Identify each load’s function and any required operating sequence so the design team can distinguish a genuinely interruptible circuit from one that only appears routine on a panel schedule.

Critical loads may support life safety, communications, controls, security, or continuity of operations; process loads may include production machinery, pumps, compressors, or other equipment whose interruption affects product, equipment, or recovery time. These categories can overlap, and their definitions depend on the owner’s operating criteria and applicable project requirements. Document the consequence and acceptable interruption for each load rather than assuming that a category name establishes code treatment or backup-power requirements.

A representative arrangement and its tradeoffs

For example, a hypothetical facility might group general building loads on a normal section, control and monitoring loads on a critical section, and large production motors on a process section. That structure can make operating priorities easier to review and may support selective load shedding if the broader system includes appropriate controls. It does not, by itself, provide independent sources, automatic transfer, isolation, or guaranteed continuity; those functions require defined equipment and system interfaces.

Physical segregation can improve circuit identification and operational clarity, but it may add sections, bus arrangements, protective devices, and space requirements. Grouping loads by category can also conflict with feeder routing, source location, available fault current, or maintenance access. A project team should compare the benefits of separation against footprint, cost, complexity, and the risk of creating a single point of failure. Final construction details and product availability must be confirmed for the specific order.

Illustrative close-up of copper busbars in a motor control panel
Illustrative industry photograph · ToT89 / Wikimedia Commons · resized · CC BY-SA 4.0

Build a usable load record

A quote and design review are more productive when the purchaser supplies a current load schedule identifying each circuit, its destination, and its proposed normal, critical, or process designation. Include connected and demand load information, voltage and phase, continuous-load status where known, motor horsepower or nameplate data, starting method, and expected operating sequence. Mark spare and future circuits separately, and identify loads that must start together, cannot restart automatically, or require a controlled shutdown.

Also provide the one-line diagram, service and source information, available fault-current data, existing equipment details when relevant, and the intended arrangement of generators, UPS systems, transfer equipment, or other sources. Identify environmental conditions, enclosure requirements, preferred incoming and outgoing configurations, and any applicable project standards. Where data are incomplete, flag assumptions explicitly. The purchaser’s engineer and other responsible project professionals should validate load estimates and system conditions before the design is finalized.

Coordinate protection across the system

Segregation works only when protective devices are considered as part of the complete distribution system. Coordination review may involve the utility or upstream service device, switchboard mains, feeder breakers, downstream panels, transformers, motor protection, and ground-fault protection where applicable. The reviewer needs device types and settings, conductor and transformer data, fault-current information, and the owner’s requirements for selective operation. A category assignment alone cannot establish that a fault will be isolated to one load group.

Coordination can involve tradeoffs between selectivity, equipment protection, arc-flash exposure, and available device options. The applicable study and settings must be determined by qualified project professionals using actual system data; they are not inferred from a switchboard layout. Clarify who provides the study, reviews proposed settings, approves protection changes, and communicates final settings to commissioning or operating personnel. Any short-circuit rating and device combination must be checked against the project’s calculated conditions and specified requirements.

Define interfaces, approvals, and scope

Load segregation often crosses design boundaries. The switchboard manufacturer needs clear connection and control requirements from the electrical engineer, utility, generator or UPS supplier, transfer-equipment designer, and controls team as applicable. Confirm source-interlocking expectations, control-power needs, metering and alarm signals, communications protocols, cable-entry constraints, and which party supplies field wiring or external equipment. In Dallas–Fort Worth or elsewhere, shipping a new assembly does not establish local installation, engineering, or commissioning scope; those responsibilities should be assigned in the project documents.

Before release, the purchaser’s responsible engineer should approve the one-line diagram, load schedule, protective-device basis, ratings, and interface details, with revisions controlled as the design develops. Specify required standards, submittals, inspection expectations, and any U.S.-origin requirements for components. Low-voltage switchboards may be designed as UL 891 assemblies when applicable, but that does not establish a particular assembly’s listing or suitability without confirmation. Equipment ratings, component availability, standards, and origin requirements are order-specific; the manufacturer should verify what can be supplied before commitment.

PROJECT CONSIDERATIONS

Specifications & planning

Review the details that matter for your application. Final specifications and availability should be confirmed for your project.

Distribution Switchboards: specifications and planning considerations
Evaluation factorInformation to confirm
Load priorityOperating consequence and acceptable interruption for each circuit
Load documentationSchedule, nameplate data, demand assumptions, and future loads
Protection coordinationUpstream and downstream devices, fault-current data, study responsibility
System interfacesSources, transfer equipment, controls, metering, and connection boundaries
Approval basisApplicable standards, required submittals, ratings, and order-specific availability
READY TO DISCUSS YOUR PROJECT?Let's build what's next.
Call (951) 403-5738
LET'S GET TO WORK

Power your next project
with confidence.

Talk through your switchgear and power distribution needs with our team.

Call (951) 403-5738
Request a Quote