NEW AMERICAN-MADE POWER DISTRIBUTIONSERVING DALLAS – FORT WORTH
Switchgear cabinets on pallets in an equipment warehouse
NEW EQUIPMENT FOR DALLAS–FORT WORTH

2.4 kV Switchgear Specification Guide

Plan a nominal 2.4 kV medium-voltage system by checking grounding, equipment ratings, protection, insulation, and service interfaces.

MADE IN USAAmerican components
UL 891Switchboard assemblies
SHORT LEAD TIMESConfirm your project schedule
BUILT FOR YOUR PROJECT

Power distribution, with purpose.

A nominal 2.4 kV system needs more than a voltage label on a switchgear specification. The design team must establish how the source is grounded, what equipment voltage class and insulation level are required, how faults will be detected and cleared, and how the gear connects to the transformer, loads, and upstream protection. Confirm that the manufacturer can supply the specific 2.4 kV configuration before treating it as an available product; ratings, components, standards, and U.S.-origin requirements require review for each order.

Define the system voltage and conductor arrangement

State whether 2.4 kV is the nominal line-to-line voltage of a three-phase system, and identify the source and connected loads. In a balanced three-phase wye system, the theoretical line-to-neutral voltage is approximately 1.39 kV, calculated by dividing 2.4 kV by the square root of three. That value is not a substitute for confirming the actual winding connection, grounding, and voltage available at the equipment. A delta-connected system may have no grounded neutral and may not provide a usable line-to-neutral supply.

Specify the number of phases and wires, neutral availability, and whether any loads require line-to-neutral service. Identify connected motor, transformer, and other load voltages separately from the system nominal voltage. Also distinguish nominal system voltage from the switchgear's rated maximum voltage: equipment must be selected for the applicable system and insulation conditions, not simply ordered by matching the number 2.4 kV.

Resolve grounding before choosing protection

Describe the source grounding method, such as solid, resistance, reactance, or ungrounded, and identify where grounding equipment is located. The grounding arrangement affects ground-fault current, transient overvoltage exposure, detection sensitivity, and the method used to alarm or trip. If a grounding transformer or resistor is part of the system, include its connection, rating, and protective-device interface in the design information.

Do not assume that a 2.4 kV designation implies a particular grounding method or ground-fault response. Ask the engineer of record to document expected fault current and the intended response to phase-to-ground faults, including whether continued operation is acceptable after an alarm. A mismatch between source grounding and relay settings can leave faults undetected or cause unnecessary outages, so confirm the coordination basis before finalizing the switchgear arrangement.

Illustrative close-up of copper busbars in a motor control panel
Illustrative industry photograph · ToT89 / Wikimedia Commons · resized · CC BY-SA 4.0

Verify equipment voltage, insulation, and frequency

Request the equipment's rated maximum voltage and applicable insulation and dielectric ratings, then compare them with the system study and operating conditions. These are equipment characteristics, not alternative ways to state nominal voltage. Elevation, contamination, humidity, switching conditions, and the connected cable system may affect insulation selection or application. Confirm required clearances and test criteria with the responsible engineer and manufacturer rather than inferring them from the nominal 2.4 kV value.

State system frequency, normally 60 Hz in U.S. applications, and disclose any unusual frequency, harmonic, or duty requirements. Identify the applicable standards and project specifications, including any owner or utility requirements. UL 891 applies to low-voltage switchboards and should not be used as a blanket claim for medium-voltage switchgear. Applicable standards, ratings, and whether a particular configuration is offered must be confirmed for the specific order.

Coordinate fault interruption and upstream service

Provide available short-circuit current at the switchgear bus, source and transformer data, and the expected contribution from motors or other sources. The design team needs these inputs to select interrupting and withstand ratings and to coordinate protective devices. Specify the protection functions, relay requirements, current-transformer details, trip interface, and any metering or communications needs. A nominal voltage alone does not establish a suitable fault rating or protection package.

Map the service path from utility or generation source through transformers, incoming equipment, bus sections, feeders, and downstream devices. Include upstream relay or fuse data and downstream equipment limits so the coordination study can account for selectivity and clearing times. If the 2.4 kV gear will serve a critical process, explain the acceptable outage and transfer philosophy; any tie, interlock, or alternate-source scheme must be engineered for the actual system rather than assumed from a general product description.

Plan interfaces, site conditions, and a complete quote request

A useful quote package identifies the one-line diagram, nominal voltage and frequency, phase and wire arrangement, grounding method, bus configuration, incoming and feeder quantities, load data, and required protection and metering. Add available fault-current information, equipment-room dimensions, cable entry direction, termination preferences, ambient and altitude conditions, and applicable specifications. Drawings and studies should be current enough to represent the intended installation; unresolved items should be clearly marked for engineering review.

For projects in Dallas–Fort Worth or elsewhere in the United States, coordinate delivery constraints with the electrical contractor and site team, including receiving access, unloading responsibility, indoor or outdoor placement, and the sequence for setting equipment. The manufacturer builds and supplies new equipment, with custom configurations and American components available as project requirements and component sourcing allow; shorter lead time is a goal, not a guarantee. Before publication or purchase, validate that the specific 2.4 kV configuration is offered and confirm ratings, component availability, standards, origin requirements, and schedule for the order.

PROJECT CONSIDERATIONS

Specifications & planning

Review the details that matter for your application. Final specifications and availability should be confirmed for your project.

2.4 kV voltage planning: specifications and planning considerations
Evaluation factorInformation to establish
Voltage basisNominal line-to-line voltage; line-to-neutral needs and connection
GroundingSource method and ground-fault response
ProtectionAvailable fault current, relay functions, and coordination inputs
Insulation and serviceEquipment rating, site conditions, frequency, and interfaces; subject to engineering review
READY TO DISCUSS YOUR PROJECT?Let's build what's next.
Call (951) 403-5738
LET'S GET TO WORK

Power your next project
with confidence.

Talk through your switchgear and power distribution needs with our team.

Call (951) 403-5738
Request a Quote