NEW AMERICAN-MADE POWER DISTRIBUTIONSERVING DALLAS – FORT WORTH
Switchgear cabinets arranged on a warehouse floor
NEW EQUIPMENT FOR DALLAS–FORT WORTH

2.4 kV System Equipment Class Selection

Select equipment for a 2.4 kV system by checking nominal voltage, maximum rating, insulation, fault duty, interfaces and project-specific requirements.

MADE IN USAAmerican components
UL 891Switchboard assemblies
SHORT LEAD TIMESConfirm your project schedule
BUILT FOR YOUR PROJECT

Power distribution, with purpose.

A 2.4 kV system label is a starting point, not a complete equipment specification. Selecting switchgear requires matching the system’s nominal voltage to the equipment’s maximum voltage rating, insulation design and ability to withstand or interrupt the available fault current. Those values depend on the actual system and application, so the responsible engineer must confirm the final selection.

Translate the 2.4 kV nominal value into an equipment rating

Nominal voltage describes the system’s intended operating level; it does not, by itself, establish the maximum voltage the equipment must accommodate. The design basis should identify the highest system voltage, operating range, grounding method and any conditions that could affect voltage to ground. Confirm the applicable voltage class and equipment maximum rating against the project’s governing standards and the manufacturer’s documentation. Do not select a class simply because its label appears close to 2.4 kV.

Equipment ratings are not interchangeable across voltage classes or product types. A nominal system value also should not be confused with a device’s maximum rating, insulation level or switching capability. For a purchaser, the useful request is not merely “2.4 kV switchgear,” but a specification that states system conditions and the required equipment ratings for the intended service. The responsible engineer should resolve any discrepancy between the one-line diagram, equipment schedule and procurement specification before release.

Check insulation against the installation environment

Insulation selection must account for more than normal phase-to-phase voltage. Grounding configuration and system behavior during ground faults affect the voltage stresses that can appear on insulation. The engineer should review the insulation coordination basis, expected overvoltage conditions and the applicable test requirements for the selected equipment. Equipment maximum voltage and insulation withstand values should be verified as distinct specification items rather than treated as synonyms.

Installation conditions can also influence insulation performance and equipment arrangement. Indoor or outdoor location, altitude, ambient temperature, contamination, moisture and enclosure requirements may change what is appropriate or available. Where the project has unusual environmental conditions, provide them with the inquiry rather than relying on a generic catalog assumption. Final insulation ratings and any derating or special construction requirements need confirmation for the actual order.

Illustrative close-up of copper busbars in a motor control panel
Illustrative industry photograph · ToT89 / Wikimedia Commons · resized · CC BY-SA 4.0

Establish fault duty from the system study

Available fault current is a separate selection input from nominal voltage. The short-circuit duty at the equipment depends on the source, transformer data, conductor impedance, motor contribution and system configuration, among other factors. Request or provide the latest fault study and identify the location at which the duty applies. A value copied from another bus or an older study can lead to an unsuitable interrupting or withstand requirement.

Specify the required short-circuit rating and the applicable time basis, as well as the interruption requirements for the switching devices. The study and equipment ratings must align with the protection scheme and expected operating configuration, including any alternate feeds or bus ties. Ratings, component availability and coordination assumptions must be confirmed for the specific build. Final protective-device settings remain subject to review by the responsible engineer; an example rating or prior project value is not approval for this application.

Coordinate devices, buswork and system interfaces

A workable selection considers the complete assembly and its connections, not just the nominal voltage printed on a nameplate. Define the required feeder and main-device functions, bus arrangement, metering, protection, control power and interlocks. Identify incoming and outgoing cable or bus connections, phase sequence, grounding provisions and the equipment’s connection to upstream and downstream systems. These details affect layout, component selection and whether the proposed arrangement fits the electrical design.

Also document physical and operational constraints, including lineup dimensions, access and maintenance clearances, cable entry direction, environmental enclosure needs and integration with existing equipment. Protection relays, instrument transformers and control interfaces should be specified in a way that supports the approved one-line and coordination study. If equipment must match an existing lineup, provide verified interface drawings and nameplate information; visual similarity alone does not establish electrical or mechanical compatibility.

Prepare a quote package that supports an accurate selection

For a new-equipment quote, supply the one-line diagram, project specification, equipment schedule, fault-study information and required ratings. Include system grounding and operating conditions, device functions, protection and metering requirements, control voltage, connection details, environmental conditions and any dimensional or interface constraints. Identify applicable standards, documentation and testing requirements, and state whether the project has specific U.S.-origin requirements. These inputs help clarify what is required without assuming that a particular class or component is universally available.

A DFW-area purchaser and a customer elsewhere can use the same technical package; serving Dallas–Fort Worth does not imply that equipment is manufactured at a local facility. The manufacturer builds and supplies new equipment, with custom builds and American components available as project requirements permit. A shorter lead time may be a goal, not a guarantee. Confirm the proposed ratings, components, standards, origin requirements and schedule for the specific order before relying on them in the project plan.

Document assumptions before approving the final class

The selection record should show how system nominal voltage, maximum equipment rating, insulation requirements and fault duty were reconciled. Record the source and revision of the one-line, system study and governing specification, along with any assumptions about grounding, operating configuration or environmental conditions. This makes review more useful when project data changes and helps prevent a preliminary selection from being treated as a final design decision.

Before purchase and release for manufacture, the responsible engineer should review the final equipment schedule, drawings, ratings and protection requirements against the project documents. Confirm applicable standards and assembly details for the specific order; UL 891 applies to low-voltage switchboards and should not be used as a blanket designation for medium-voltage equipment. The example factors below are prompts for evaluation, not recommended ratings or a substitute for engineering review.

PROJECT CONSIDERATIONS

Specifications & planning

Review the details that matter for your application. Final specifications and availability should be confirmed for your project.

2.4 kV application: specifications and planning considerations
Evaluation factorInformation to confirm
System voltageNominal value, maximum operating condition and grounding method
Equipment ratingMaximum voltage and insulation requirements for the application
Fault dutyAvailable current, location, time basis and device interruption needs
InterfacesBus and cable connections, protection, controls and physical constraints
READY TO DISCUSS YOUR PROJECT?Let's build what's next.
Call (951) 403-5738
LET'S GET TO WORK

Power your next project
with confidence.

Talk through your switchgear and power distribution needs with our team.

Call (951) 403-5738
Request a Quote